All About Microsoft Windows And Technology !!!

Fix your pc needs to be repaired error 0xc0000225 on windows 10

Windows Users face problem your pc needs to be repaired error 0xc0000225 or your pc needs to be repaired error code 0x00000f at startup and this error make windows unable to start normally. And the most common cause of the error 0xc0000225, your pc needs to be repaired error code 0xc00000d is that the Boot Configuration Data BCD file has become missing or corrupt. That could happen because of disk write errors, power outages, boot sector viruses, or errors made while configuring the BCD manually. Also, this can happen when the system becomes unstable & critical system files start missing. Number of users report After A new hardware device or new Software installation they get error 0xc0000225 , your pc needs to be repaired error code 0xc00000d, your pc needs to be repaired error code 0xc00000f on windows 10 and 8.1 computers

Also Sometimes this error could be encountered if windows shut down unexpectedly while Installing a critical update.  For some Other users, the error code will different like 0xc000000f – An error occurred while attempting to read the boot configuration data

0xc000014C – The Boot configuration data for your PC is missing or contains errors

0xc0000225 – Boot selection failed because a required device is inaccessible

0x0000098, 0xc0000034 – Boot Configuration Data file missing required information or does not contain a valid OS entry.

Fix error 0xc0000225

So If you are also suffering from this error 0xc0000225, Unable to boot windows normally. And looking for solutions to fix this problem, Here fallow bellow steps.

Remove External devices

Start with basic troubleshooting make sure any external device does not cause this error 0xc0000225, your pc needs to be repaired error code 0xc00000f. To check and confirm Remove all external devices attached to your computers like external Hard disk, printer, webcam, sound jack, scanner, or any other external devices. Also if you notice after insert the new keyboard and mouse the problem started then remove them and check windows starts normally. If yes then there is a problem with one of your external devices. You have to find out the problematic device by insert one by one and start every time the system, when you got the problematic device to remove the driver for that device. Visit the device manufacturer’s website, download the latest driver for that device and install. Now check the problem is fixed. Still getting problem contact device manufacturer.  If you think there is nothing wrong with external devices then follow the next troubleshooting step.

Access Advanced boot options

Due to this problem system don’t allow to boot normally and we cant perform any troubleshooting steps to fix this problem. So you have to Access Windows 10 advanced Boot option, Where you can get a number of troubleshooting tools like startup repair, Advanced command prompt, system restore, go back to the previous version, boot windows into safe mode, etc. Check How To Access Advanced Boot options using windows 10 bootable media.

Also, you can refer to the below video to Access Windows 10 Advanced boot options. 

Now here on the Advanced Startup Options menu As shown below the image.  Windows will represent different Troubleshooting tools to fix Startup problems like System Restore, Startup Repair, Command prompt, system image Recovery, Startup Settings, etc.

 Perform Startup Repair

Now on the Advanced options screen click on the Startup Repair option. when you select startup repair this will restart the window and during startup, this will start diagnosing your system. During this diagnostic phase, Startup Repair will scan your system and analyze the various settings, configuration options, and system files as it looks for corrupt files or botched configuration settings. More specifically, Startup Repair will look for the following problems:

  1. Missing/corrupt/incompatible drivers
  2. Missing/corrupt system files
  3. Missing/corrupt boot configuration settings
  4. Corrupt registry settings
  5. Corrupt disk metadata (master boot record, partition table, or boot sector)
  6. Problematic update installation

If Startup Repair detects any of these types of problems, it will automatically attempt to fix them. If Startup Repair can fix the problem, it will do so without any intervention. It will then restart the system and boot normally. Most of the time after performing the Startup repair This error 0xc0000225 Your PC needs to be repaired gets solved. If you still having the same error after performing Startup Error then follow the next Troubleshooting step.

Repair Corrupt boot Volume (MBR)

Same from Advanced startup options open command prompt and perform bellow command to repair the Corrupt boot volume and fix error 0xc0000225, your pc needs to be repaired error code 0xc00000f.

From Advanced boot options select Troubleshoot > Advanced Options Select Command Prompt from the list of options now When Command Prompt appears, enter the following lines and press Enter after each line in order to run it:

  1.   Diskpart
  2.   List volume

Note down your windows installation volume ( check bellow picture for better understand )

Now Type Exit

The above-listed commands help you to find out the Windows Drive Letter that is going to require treatment. This is essential to understand the part of our windows Drive Letter that requires the troubleshooting process.

Now Perform Bellow commands to fix :

Frist Type D: ( Note your driver letter may be different ) and hit the enter key.

Next Type bootrec.exe /fixmbr hit enter to execute the command and fix the master boot record.

After that type bootrec.exe /fixboot hit to fix the boot device-related problem.

Now Use the command bootrec.exe /rebuildbcd and hit enter to execute the command. next type exit.
fix bootrec Errors

Repair Bed Sectors for Hard Disk

After fixing the Boot MBR check the hard disk for errors. As we discuss the error is generated due to a corrupted hard disk. so first check your hard disk for errors Sometimes corrupted files on your hard drive can cause these types of errors to appear, but you can fix these errors by performing a chkdsk scan. To perform this scan, Type: chkdsk /f /r
Choose “Y” for yes for the question concerning would you like to force a dismount on this volume (Y/N)  when you press the Y key this will show volume dismounted app opened handles to this volume are now invalid. and the scanning process will start to wait until stage 5 is complete. this process will take some time waiting for that. after complete the scanning process, you will get a screen as shown below.


Now Type command Exit to exit the command prompt and when the advanced screen appears click on turn off your pc. When you Start your system next time hope you didn’t face any Startup Error Your PC needs to be repaired by Windows 10. Check After perform this Step problem gets solved. still having the same issue fallow next step.

Disable Driver Signature Enforcement permanently,

Also, Sometimes Driver signature enforcement can cause this type of problem. We recommend to once disable the Driver signature enforcement and start windows. May this option work for you.

To do this Access the command prompt from advanced boot options and type the below commands one by one and hit enter key.

bcdedit -set loadoptions DISABLE_INTEGRITY_CHECKS
bcdedit -set TESTSIGNING ON

Reboot your computer. and check windows started normally. If you want to enable signature enforcement in the future, then open Command Prompt (with administrative rights) and type these commands in order:

bcdedit -set loadoptions ENABLE_INTEGRITY_CHECKS
bcdedit /set testsigning off

Perform system Restore 

If after performing all the above methods Your PC needs to be repaired windows 10 Startup Error is not solved then system Restore can fix your system by Revert back your system to a previous working state. you can perform the System Restore from Advanced startup options.

To perform System Restore First Access Advanced Startup Options Here Select the System Restore option.

When the Restore system files and settings open click on next Now on Restore your computer to the state it was in before the selected event screen select the Restore point date and click next.

On the next screen When you click on the finish this will prompt a screen “Once Started, System Restore can not be interrupted. Do you want to continue ? ” click yes to confirm the System Restore.

This will start the system Restore Initializing window, Restoring files, Finalizing file Restore, Finishing Restore and Windows will Restore the windows. After restart windows will prompt a confirm message System Restored successfully. And you will get back your windows working normally.

These are some best working solutions to fix your pc needs to be repaired error 0xc0000225 on Windows 10, 8.1, and Windows 7 computers. Still have any queries, suggestions feel free to comment below.

You might also like
Leave a comment

This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Accept Read More